Tony arrived last, around 7:15pm so we did his at my complex, that's him in my car checking out my dash.

Cleaning off the front end. Tony took off his emblem because he is getting the J-Spec badge. He also has a plug to fill the hole where the dealer drilled for the license plate bracket.

Tony already had his radio shack antenna that was bent over from his 2 hour drive!

Someone wanted a picture of my Aluminum dash kit

Alan lays down piece #1

The finishing touches.

Tony watches in amazement as Alan trims the front edge of piece #1 for the best fit.

Tony helps Alan (as I supervise :-)

We are losing our sun as Alan lines up piece #2

The finishing touches on piece #2

Starting piece #3

Lining up the parking light and edges of piece #3

Alan works the details.

Getting dark so we brought out a lamp to throw some light on the situation.

Tony watches as Alan installs piece #4 the lower sections.

Alan does the lower piece on the other side.

If only Wayne had been here we would have had 3 yellows at once! :-) The camera flash lit up the tail lights and my plate

Alan gives the thumbs up, and is looking a little "glazed" from his third install of the day!

Tony also had the mirrors done

Alan and Tony point out the finished product